Vmware Fusion Macos

Posted onby admin

# Requirements

Download macOS Sierra Final (1 Part); Download mac OS Sierra Final (7 Parts); Download VMware Fusion; Step #1. Download the Unarchiver App #1.First, what you are going to do is open Apple App Store. VMware Fusion allows you to, seamlessly, blend Windows with Mac without, significantly, cluttering your desktop. For an unparalleled experience, use the Fusion’s ‘unity’ mode to conceal Windows desktop so that individual Windows apps operate in Mac as if they were ordinary Mac apps. Download VMware Fusion 12 and let your Mac run Windows, Linux or Mac OS X Server. Run the most demanding Mac and Windows applications side-by-side at maximum speeds without rebooting. While this is possible with Fusion 12.0 and macOS 11.0, there are many critical bugs fixed in Fusion 12.1 and macOS 11.1, so we recommend using those versions and newer. Note: This is an experimental feature and is not recommended for production VMs There are known bugs which may cause an immediate kernel panic of the VM (try connecting the.

Macos
  • VMware Fusion
  • Java (both the JRE and JDK work)
  • A computer running macOS
  • The desired macOS installation software installed to /Applications
  • A USB attached hard disk or SSD, or an internal disk that can be passed through entirely

Vmware Fusion Macos Remove Windows 10

# Converting Installation Media

Mac

VMware cannot directly use a raw disk image, so we'll create a linked VMDK, which will allow you to use it as a virtual hard drive in VMware Fusion.

Download raw2vmdk from here, and put it in the same directory as the .img file. Then, run the following command:

Vmware Fusion Mac Os Mojave

This will create a VMDK that references the .img file (the raw disk image) for VMware to use. If you're going to move this vmdk or transfer it to another computer, you must move the img file along with it.

# Installing macOS Big Sur in VMware Fusion

You have two options here: pass through a raw disk, or pass through an entire USB device. The steps are not that different for both, so they'll be combined here.

  1. (Skip this if you are doing USB passthrough) For raw disk passthrough, attach the disk that is your target for macOS installation, and create a virtual hard disk that references it to use with Fusion.

    Note: You may need to remove the partitions of the disk before using it.

  2. Next, start VMware Fusion. You should see the homepage. If not, close any window that opened and select File > New from the menu bar.

  3. Select the 'Create a custom virtual machine' option, and select macOS 10.15 (as 10.16/11 isn't available).

  4. Select 'Use an existing virtual disk' at the screen below.

  5. Then, click 'Choose virtual disk' and select the Install macOS Beta.vmdk vmdk we made earlier. If you want to make sure VMware does not copy the disk to where you will be storing the VM (for example, if you are low on space), select 'Share this virtual disk with the virtual machine that created it'.Once done, it should look like this.

  6. Hit Continue, then click 'Customize Settings'. Make sure to save the VM to somewhere that's not the disk you are passing through.

    Once done, you should arrive at a screen that looks like this.

  7. First, select 'Processors & Memory', and set the memory to at least 4096 MB.

  8. (If you are doing raw disk passthrough, skip this step) Select 'Show All' and click 'USB & Bluetooth'. Plug in your USB device and under 'Plug In Action', change it from 'Ask what to do' to 'Connect to the VM'. It should look similar to this when done. (In this case, 'VIA AmazonBasics Hard Drive Enclos' is my device.)Then, close the window.

  9. (If you are doing USB passthrough, skip steps 9 through 13) Close the window and close VMware Fusion. Locate the 'macOS 10.15.vmwarevm' (or whatever you named it when saving) folder in Finder, and right click > 'Show Package Contents'.

    The result should look like the image below.

  10. Open the vmx (not vmxf or vmx.lck folder) file in TextEdit. It should look something like this:

  11. Find the lines starting with sata0:1:

  12. Replace all the lines starting with sata0:1 with the following. Replace <path/to/vmdk> with the full path to RawHDD.vmdk, created earlier above.

    Tip: Find it in Finder, then right click, hold down option, and select 'Copy 'RawHDD.vmdk' as Pathname' to get the full path easily.

    It should look something like the below when done.

  13. Save and quit TextEdit, and reopen VMware Fusion. Your VM should automatically open, but if not, open it from the Virtual Machine Library.

  14. Select 'Virtual Machine' > 'Power On To Firmware' from the menu bar, so that we can boot to the VM BIOS.

    • (For raw disk passthrough) If you get prompted for your password when you do this, enter it. Even though the prompt mentions Boot Camp disks, it is still working normally.

    • If you get an error that the resource is busy like below, run the following in Terminal and try again:

  15. You should get to the VM Boot Manager, as shown below. Select the first hard drive ('EFI VMware Virtual SATA Hard Drive (0.0)). The VM should start booting the Big Sur installer.

  16. Complete the installation as you would on any other device.the installation is complete, and you are at the Welcome screen, select 'Virtual Machine' > 'Shut Down' from the menu bar.

    If needed, add your prepared EFI to the EFI partition on the device, then eject it.

    Place the drive back in your hack and boot normally. You now have Big Sur!

Fusion

Welcome to Manjaro site mini how-to. In this short article, I am going to show you how to correctly and completely uninstall VMware Fusion from macOS Catalina. A few days ago I installed the latest VMware Fusion on my AMD Hackintosh. But it did not work well so I decide to uninstall it. I am basically a Windows user so I had a difficulty to find the uninstaller for VMware Fusion.

Unlike Windows programs, most Mac software do not come with uninstaller. But actually, removing software from Mac is pretty easy, especially this VMware Fusion. This software was installed as a complete bundle. To remove or uninstall it we do not need uninstaller.

Steps to Uninstall VMware Fusion from macOS Catalina

Open Finder and go to the Applications folder. Now drag the VMware Fusion to the Trash. Or, right-click and choose Move to Trash.

After you move the VMware Fusion to the Trash bin, we need to remove the VMware folders. You can check the following folders and remove them if they exist.

Now you can empty your Trash.

Vmware Fusion Macos Big Sur

To complete the manual uninstall step, run this command on Terminal to remove any traces of VMware.

There is an easier way to do this. Use the third-party software called CleanMyMac X. It’s a great software that can automate many tasks, make your Mac runs faster, and so on.