GPU works on displaying the screen content and locates on the graphics card/motherboard/CPU inside your computer. It can overheat easily when you are playing games or running programs which occupy a lot of GPU. To keep GPU healthy, it’s necessary to monitor the GPU temperature usually and you can check the GPU temperature of your Windows 10 PC with the 2 useful ways below.
Elica Temperature Manager
Note: Generally, the GPU temperature can be detected when the GPU is present on the dedicated graphics card.
Temperature Manager Windows 10
1. Check GPU Temperature in Windows 10 via Task Manager
The more prominent temperature for the laptops is 30 degrees to 60-degree Celsius, while above that temperature will invite troubles. Using the Open Hardware Monitor tool Open Hardware Monitor is a great solution for the Windows users as through this you will be able to quickly get the whole information regarding the temperature and various. The core values at TemperaturePro are simple we are honest and we care about your comfort. We’d rather fix your system today and form a trusting relationship than try to sell you a new system you don’t yet need.
Starting with Windows 10 Build 18963, the GPU temperature option is added to Task Manager. To view this option, your computer needs to meet the following conditions.
- There is a dedicated GPU card in your Windows 10 pc.
- The GPU card driver supports version 2.4 (or higher) of WDDM. You can check the WDDM version by searching dxdiag in the Start menu and enter it > switch to the Display tab > view the WDDM model in the right pane.
If your computer fulfills the requirements above, just follow the operations to try the new feature.
Step 1: Type Task Manager in the start menu and run it as an admin.
BD Pyxis ™ Remote Manager Temp Monitor and BD Pyxis ™ Remote Manager are software modules and electronic latch systems that automate the dispensing of temperature-sensitive medications, fluids, tissues and implants. BD Pyxis Remote Manager Temp Monitor adds a temperature sensor with digital display for storage-device temperature monitoring. Voltages, temperatures and fans speed monitoring. HWMonitor is a hardware monitoring program that reads PC systems main health sensors: voltages, temperatures, fans speed. The program handles the most common sensor chips, like ITE® IT87 series, most Winbond® ICs, and others. In addition, it can read modern CPUs on-die core thermal sensors, as well has hard drives temperature via S.M.A.R.T,. Check GPU Temperature in Task Manager on Windows 10 1- Open the Task Manager. 2- Then click the performance tab and from there select GPU vertical tab. Notice the GPU temperature at the bottom of the task manager screen. There are some limitations.
Step 2: Click More details in the lower-left corner.
Step 3: Switch to the Performance section.
Step 4: In the left pane, select GPU and then you can see the GPU temperature.
2. Check GPU Temperature in Windows 10 with Tool
If you can’t test the GPU temperature of your Windows 10 pc with the way above, don’t be sad, you can still check the GPU temperature with a tool. As some manufacturers of graphics cards would develop specialized tools for users to monitor their graphics cards like Radeon Overlay for the AMD Radeon graphics card, you can check whether there is a customized tool for your GPU card.
Or you can search the third-party tool for checking/testing GPU temperature in the Internet and find the suitable one to monitor the GPU temperature of your Windows 10 pc.
Real Temp is a temperature monitoring program designed for all Intel single Core, Dual Core, Quad Core and Core i7 processors.
Each core on these processors has a digital thermal sensor (DTS) that reports temperature data relative to TJMax which is the safe maximum operating core temperature for the CPU. As your CPU heats up, your Distance to TJMax will decrease. If it reaches zero, your processor will start to thermal throttle or slow down so maximizing your distance away from TJMax will help your computer run at full speed and more reliably too.
- Reads temperature information from all Intel Core based processors. Pentium 4 processors are not supported.
- Ability to individually calibrate Real Temp for each core of your CPU.
- Program is based on temperature data gathered using a Fluke 62 IR Thermometer.
- Test Sensors feature will check your DTS sensors for any sign of problems.
- Keeps track of Minimum and Maximum temperatures with full logging features.
- Reporting and logging of the Intel PROCHOT# thermal throttle activity bit.
- Quick, very accurate and repeatable benchmark.
- Displays MHz, TJMax, CPUID, APIC ID and Calibration settings.
- High temperature alarm and shutdown feature based on CPU or NVIDIA GPU temperature.
- No installation or registry modifications required.
- Support for Windows 2000 / XP / Vista / Windows 7 / Windows 8 / Windows 10 (32 & 64 bit)
See the Installation & Calibration Page.
DownloadsThe latest version is available in the downloads section.
Changes in Version 3.70
- Support for Sandy Bridge CPUs.
- VID based power consumption estimates for the newer CPUs.
- Improved log file formatting.
- Added a single system tray icon that reports the maximum core temperature.
- RealTemp GT updated for the 6 core Sandy Bridge E CPUs.
- i7 Turbo GT 1.30 multiplier monitoring tool.
Changes in Version 3.60
- Added Core i Turbo multiplier and Turbo TDP/TDC overclocking for Extreme / K series CPUs.
- Added ATI GPU and improved NVIDIA GPU monitoring with CrossFire and SLI support.
- Added a system tray / notification area font selector.
- New Fahrenheit and 3 digit system tray option.
- Fixed Core 2 Extreme multiplier reporting.
- Fixed Core 2 mobile CPU C0% based load reporting.
- Changed how Core 2 Super Low Frequency Mode (SLFM) is reported.
- Improved sensor test consistency.
- Bug with Reset button on ATI systems fixed.
- RealTemp GT for the 6 core Gulftown CPUs was also updated.
- Separate i7 Turbo GT multiplier monitoring tool for 6 core Gulftown CPUs added.
Changes in Version 3.40
- Core i7/i5/Xeon socket 1156 support including accurate turbo mode reporting.
- new information window for Nvidia GPUs with improved SLI support.
- correct reporting of Super Low Frequency Mode (SLFM) for Core 2 mobile CPUs.
- correct reporting of Intel Dynamic Acceleration (IDA) for Core 2 mobile CPUs.
- added VID reporting to the main GUI for Core 2 based CPUs.
- added a Fahrenheit=1 INI file option.
- added the option to view a Task Manager based or a C0% based load meter.
- added the ability to toggle C1E state and view the SpeedStep (EIST) state.
- improved dual and multi-monitor support including Anchor mode.
- includes RealTemp GT, a 6 core version of RealTemp for Gulftown CPUs.
- includes i7 Turbo, a high precision multiplier monitoring tool for all Core CPUs.
- and includes LoadTester, a variable load, single core testing program.
- Skull=1 or Skull=2 INI option for reading each CPU on a Dual Quad system.
- thanks rge, burebista and somebody on TPU for all of your ideas and help.
Changes in Version 3.00
- Core i7 temperature and frequency support including Turbo mode.
- NVIDIA temperature reporting with highest GPU temperature displayed in SLI mode.
- Ability to run a file or shutdown based on user defined alarm temperature.
- Updated interface with modern XP / Vista style and border in Mini Mode.
- Start Minimized Vista issues finally fixed.
- New RivaTuner plug-in support.
- Extra information on the main screen and the retirement of the toggle button.
- Switch to UNICODE for better international support.
- Adjustable GUI colors and bold System Tray font option.
- TJMax updated based on new Intel documentation and further testing.
- Calibration formula simplified.
- All new CPU Cool Down Test for a more thorough look at your sensors.
- Clock Modulation & Minimize on Close options.
- New CPU Load meter, log file headings and Distance to TJMax in the System Tray.
- 101 other improvements including initial Windows 7 Beta support.
Changes in Version 2.70
Repetier Temperature Manager
- Redesigned user interface (GUI) with larger temperature fonts.
- Added a movable Mini-Mode that is turned on and off with a double left mouse click on the GUI.
- Added an Anchor position so the GUI will move to a fixed screen position after a double right mouse click.
- Anchor position can be customized by holding down the Shift key while double right clicking.
- The correct physical core order of Quad core processors is now reported based on APIC ID.
- Added reporting of Minimum and Maximum VID as well as current VID.
- A new user selectable high temperature alarm with two alarms for Quad core processors.
- More accurate MHz calculation as well as FSB and CPU multiplier reporting.
- New program Up Time feature.
- Bug fix for log file output when using a Single or Dual core processor.
- Fixed and improved the Default button in the Settings window.
- Button labels and functionality changed in Settings window to follow the Windows style guide.
- Improved multi-threading and memory usage for better long term stability.
- Start Minimized option improved for better Vista support. See the documentation for more info.
- Option to save the Log file in .CSV format for easy Excel support.
- Gamer Mode temporarily retired.
Changes in Version 2.60
- Added a new Settings screen where all adjustments can be made in real time including TjMax.
- Temperatures of any core are now displayed in the System Tray area. Thanks W1zzard!
- 4 font options for the System Tray.
- Choice of Current, Minimum, Maximum or Average termperature displayed in the System Tray.
- Test Sensors feature improved to increase repeatability.
- CPU real time MHz calculation was re-worked for better SetFSB / ClockGen support.
- Calibration options now include one digit after the decimal point for finer adjustments.
- Experimental Gamer Mode introduced which allows core temperatures to be seen in some games.
Changes in Version 2.5
- Added minimize to System Tray support.
- Correctly reports CPU MHz for the new 45nm processors.
- Displays CPU voltage identification (VID).
- Start minimized option and now opens and closes in the same location.
Changes in Version 2.41
- adjustable Idle calibration for each core and expanded range from -3 to 3.
- adjustable TjMax for each core.
- log interval options expanded from 1 to 60 seconds.
- a change of timers used for the benchmark feature to better support overclocking from within Windows.
- Reset button added to the gui to reset minimum and maximum temperatures.
- better support of the Enter and Tab keys.