Heat Checker Pc

Posted onby admin

No matter whether you have a laptop or a PC, keeping the temperature of your components in check is essential.

You should always have an idea of how hot your CPU is. It’s also an important tool when you are over-clocking your CPU. You don’t want to over-heat your CPU. It’s also worth mentioning that Core Temp is also now going mobile that helps you monitor the processor temperature in your Android and Windows Phone devices. To check how hot your PC should be, just download any reliable PC temp monitors. These tools are free and don’t cost you a single penny. You can check CPU temp on Windows 10, Windows 8, 7, Vista, XP, and 2000 with these CPU temperature monitoring tools. Glary Utilities. Glary Utilities is a free all-in-one PC cleaning utility software for Windows. CPUID brings you system & hardware benchmark, monitoring, reporting quality softwares for your Windows & Android devices. Most of the hot air flows out of the back end of the computer case. There should be at least 2–3 inches open on either side and the back should be completely open and unobstructed. If your computer is hidden away inside a desk, make sure the door isn't closed all the time. Cool air enters from the front and sometimes from the sides of the case.

Usually, you get to know the health of your system by gauging the temperature because most of the problems start from overheating.

In this article, we shall help you check the temperature of your computer components.

Advertising

Use Intel/AMD Utilities

Depending on the processor you have on board, you can choose to use the utility programs developed by the manufacturer.

For Intel processors, you can use Intel Extreme Tuning Utility. And, for AMD processors, you will find an AMD System Monitor.

These utilities might give you other features – but it may not be intuitive enough or if you want to get more details on the voltage/temperature of all the components individually, you can try the next solution below.

Use HWMonitor

HWMonitor is the simplest (and the most useful) software you will find to view the voltages, temperatures, and fan speed. Simply download the setup file available for free through their official download page. You can also opt for the pro version for some extended features.

Use Your Motherboard’s Utility Software

Depending on your motherboard, you can download the software utility by your manufacturer to check the temperature of your computer components.

Whats My Cpu Temp

For instance, there’s an App Center software for Gigabyte motherboards where you can use the System Information Viewer to check the temperatures and other relevant details. Similarly, you will find utility tools for MSI, ASUS, and so on.

You can also set a warning limit for temperatures – as you can see in the image above.

You might be able to use the tools no matter what motherboard you have – but we would recommend you download the utilities by your motherboard manufacturer.

What’s The Ideal Temperature For Your Computer Components?

Normally, without intensive tasks, if the temperatures you observe are well-below 55 °C, you have nothing to worry about.

And, in case you are playing a game, processing a video or performing any resource-intensive task, note that the temperature does not exceed 80 °C.

It is also worth noting that you need a good case for your PC for the best airflow/cooling. If it’s a laptop, you can refer to one of our older articles highlighting the reasons why your laptop overheats.

If you are not sure how to choose a good case/cabinet/chassis for your PC, take a look at this video below:

Wrapping Up

Now that you know how to monitor and check your system’s temperature, you should keep a close eye on it whenever you perform a resource-intensive task just to be sure.

If you notice abnormal temperatures for a specific component, go ahead and contact the manufacturer to get advice on aftersales support to help fix the issue.

Filed in . Read more about Pc.

Real Temp is a temperature monitoring program designed for all Intel single Core, Dual Core, Quad Core and Core i7 processors.
Each core on these processors has a digital thermal sensor (DTS) that reports temperature data relative to TJMax which is the safe maximum operating core temperature for the CPU. As your CPU heats up, your Distance to TJMax will decrease. If it reaches zero, your processor will start to thermal throttle or slow down so maximizing your distance away from TJMax will help your computer run at full speed and more reliably too.

Main Features

  • Reads temperature information from all Intel Core based processors. Pentium 4 processors are not supported.
  • Ability to individually calibrate Real Temp for each core of your CPU.
  • Program is based on temperature data gathered using a Fluke 62 IR Thermometer.
  • Test Sensors feature will check your DTS sensors for any sign of problems.
  • Keeps track of Minimum and Maximum temperatures with full logging features.
  • Reporting and logging of the Intel PROCHOT# thermal throttle activity bit.
  • Quick, very accurate and repeatable benchmark.
  • Displays MHz, TJMax, CPUID, APIC ID and Calibration settings.
  • High temperature alarm and shutdown feature based on CPU or NVIDIA GPU temperature.
  • No installation or registry modifications required.
  • Support for Windows 2000 / XP / Vista / Windows 7 / Windows 8 / Windows 10 (32 & 64 bit)

Forums

Screenshots

Documentation

See the Installation & Calibration Page.

Downloads

The latest version is available in the downloads section.

Changes in Version 3.70

  • Support for Sandy Bridge CPUs.
  • VID based power consumption estimates for the newer CPUs.
  • Improved log file formatting.
  • Added a single system tray icon that reports the maximum core temperature.
  • RealTemp GT updated for the 6 core Sandy Bridge E CPUs.
  • i7 Turbo GT 1.30 multiplier monitoring tool.

Changes in Version 3.60

  • Added Core i Turbo multiplier and Turbo TDP/TDC overclocking for Extreme / K series CPUs.
  • Added ATI GPU and improved NVIDIA GPU monitoring with CrossFire and SLI support.
  • Added a system tray / notification area font selector.
  • New Fahrenheit and 3 digit system tray option.
  • Fixed Core 2 Extreme multiplier reporting.
  • Fixed Core 2 mobile CPU C0% based load reporting.
  • Changed how Core 2 Super Low Frequency Mode (SLFM) is reported.
  • Improved sensor test consistency.
  • Bug with Reset button on ATI systems fixed.
  • RealTemp GT for the 6 core Gulftown CPUs was also updated.
  • Separate i7 Turbo GT multiplier monitoring tool for 6 core Gulftown CPUs added.

Changes in Version 3.40

Heat
  • Core i7/i5/Xeon socket 1156 support including accurate turbo mode reporting.
  • new information window for Nvidia GPUs with improved SLI support.
  • correct reporting of Super Low Frequency Mode (SLFM) for Core 2 mobile CPUs.
  • correct reporting of Intel Dynamic Acceleration (IDA) for Core 2 mobile CPUs.
  • added VID reporting to the main GUI for Core 2 based CPUs.
  • added a Fahrenheit=1 INI file option.
  • added the option to view a Task Manager based or a C0% based load meter.
  • added the ability to toggle C1E state and view the SpeedStep (EIST) state.
  • improved dual and multi-monitor support including Anchor mode.
  • includes RealTemp GT, a 6 core version of RealTemp for Gulftown CPUs.
  • includes i7 Turbo, a high precision multiplier monitoring tool for all Core CPUs.
  • and includes LoadTester, a variable load, single core testing program.
  • Skull=1 or Skull=2 INI option for reading each CPU on a Dual Quad system.
  • thanks rge, burebista and somebody on TPU for all of your ideas and help.

Changes in Version 3.00

  • Core i7 temperature and frequency support including Turbo mode.
  • NVIDIA temperature reporting with highest GPU temperature displayed in SLI mode.
  • Ability to run a file or shutdown based on user defined alarm temperature.
  • Updated interface with modern XP / Vista style and border in Mini Mode.
  • Start Minimized Vista issues finally fixed.
  • New RivaTuner plug-in support.
  • Extra information on the main screen and the retirement of the toggle button.
  • Switch to UNICODE for better international support.
  • Adjustable GUI colors and bold System Tray font option.
  • TJMax updated based on new Intel documentation and further testing.
  • Calibration formula simplified.
  • All new CPU Cool Down Test for a more thorough look at your sensors.
  • Clock Modulation & Minimize on Close options.
  • New CPU Load meter, log file headings and Distance to TJMax in the System Tray.
  • 101 other improvements including initial Windows 7 Beta support.

Changes in Version 2.70

  • Redesigned user interface (GUI) with larger temperature fonts.
  • Added a movable Mini-Mode that is turned on and off with a double left mouse click on the GUI.
  • Added an Anchor position so the GUI will move to a fixed screen position after a double right mouse click.
  • Anchor position can be customized by holding down the Shift key while double right clicking.
  • The correct physical core order of Quad core processors is now reported based on APIC ID.
  • Added reporting of Minimum and Maximum VID as well as current VID.
  • A new user selectable high temperature alarm with two alarms for Quad core processors.
  • More accurate MHz calculation as well as FSB and CPU multiplier reporting.
  • New program Up Time feature.
  • Bug fix for log file output when using a Single or Dual core processor.
  • Fixed and improved the Default button in the Settings window.
  • Button labels and functionality changed in Settings window to follow the Windows style guide.
  • Improved multi-threading and memory usage for better long term stability.
  • Start Minimized option improved for better Vista support. See the documentation for more info.
  • Option to save the Log file in .CSV format for easy Excel support.
  • Gamer Mode temporarily retired.

Changes in Version 2.60

  • Added a new Settings screen where all adjustments can be made in real time including TjMax.
  • Temperatures of any core are now displayed in the System Tray area. Thanks W1zzard!
  • 4 font options for the System Tray.
  • Choice of Current, Minimum, Maximum or Average termperature displayed in the System Tray.
  • Test Sensors feature improved to increase repeatability.
  • CPU real time MHz calculation was re-worked for better SetFSB / ClockGen support.
  • Calibration options now include one digit after the decimal point for finer adjustments.
  • Experimental Gamer Mode introduced which allows core temperatures to be seen in some games.

Changes in Version 2.5

  • Added minimize to System Tray support.
  • Correctly reports CPU MHz for the new 45nm processors.
  • Displays CPU voltage identification (VID).
  • Start minimized option and now opens and closes in the same location.

Changes in Version 2.41

Windows Find Cpu Temp

  • adjustable Idle calibration for each core and expanded range from -3 to 3.
  • adjustable TjMax for each core.
  • log interval options expanded from 1 to 60 seconds.
  • a change of timers used for the benchmark feature to better support overclocking from within Windows.
  • Reset button added to the gui to reset minimum and maximum temperatures.
  • better support of the Enter and Tab keys.