Dropbox 64 Bit Windows 10

Posted onby admin

Depending on your operating system distribution and the package you used during installation, you could have Dropbox files in two different locations. The instructions in this article are for both cases, so some of the commands may result in an error.

  1. Open your Terminal application.
  2. Copy and paste the following lines one at a time into Terminal. Press Enter after each one.
    • Don't type commands by hand.
    • You may be prompted for your computer password (not your Dropbox password) after entering the commands. The password field in Terminal remains blank as you type your password. After you type it, press Enter.
    • You'll know that these instructions complete normally once the initial line of text (called prompt) appears.
    • Important: In the commands below, we assume that your Dropbox folder is in the default pathway. If you placed your Dropbox folder in a custom location, replace all instances of ~/Dropbox for the full location of your Dropbox folder in quotation marks. For example, if you have your Dropbox folder in the path /Volumes/DifferentPlace/Dropbox, replace ~/Dropbox from the following command lines to '/Volumes/DifferentPlace/Dropbox'.
    • Once the Terminal prompt shows up again after a command, the instruction completed the requested task and is ready for the next command. If any of the the commands do not respond after an hour, try restarting your computer and try these steps again.
  3. Deleting any of these folders will not delete the files in your Dropbox folder.

  4. Restart your computer.

Download dropbox win 10 64 bit for free. Internet & Network tools downloads - Dropbox by Dropbox, Inc. And many more programs are available for instant and free download. Dropbox をダウンロード中.数秒後に Dropbox のダウンロードが自動的に開始します。. ダウンロードが完了したら 実行 をクリックして Dropbox のインストールを始めます。. Downloading Dropbox. Your Dropbox download should automatically start within seconds. Once the download finishes, click Run to start installing Dropbox.

Download Dropbox for Windows to transform folders into connected workspace and keep team collaboration in sync with intelligent content solutions. Dropbox has had 12 updates within the past 6 months.

For an installation on a supported Linux distribution with Graphical User Interface:

  1. Get the correct package for your operating system and architecture. Download now.
  2. Navigate to the folder where you downloaded the installation file and double-click it.
  3. Apply any selective sync preferences you had before the reinstall.
  4. Select the Dropbox folder location, if not in the default location.
    • Important: Because this process removes the previous preferences and configuration, if you wish to avoid re-downloading your Dropbox content you will need to manually choose the location for Dropbox to sync to. If you don't you'll create a new Dropbox folder and start to download your content again.
  5. To select your established Dropbox folder on your drive, click Advanced Settings after choosing which folders to sync.

For an installation on a supported headless Linux distribution:

  1. Enter the following command into your terminal:
    • If your machine is 32-bit:
    • If your machine is 64-bit:
    • Scroll right for more terminal command
  2. Run the Dropbox daemon from the newly created.dropbox-dist folder:
  3. When Dropbox finishes installing, sign in and apply any preferences from before the reinstall to the list of excluded items.

Here is the educational tutorial on installing BMW INPA/EDIABAS diagnostic software on Windows 10 64-bit. Enjoy.

Disclaimer:

You are at your risk. INPA will work with few select things for an E38 such as resetting adaptations, diagnostics, code reading, etc. NCS Expert will NOT run on a 64-bit operating system. If you have a 32-bit version of Windows 10, please feel free to try ECS Expert and let me know if it works!
Credits: perishalive92

Pre-installation Download:

BMW INPA K+DCAN cable USB interface

Dropbox 64 Bit Windows 10

Is There A 64 Bit Version Of Dropbox

You will Winrar or 7zip or a .rar file extractor similar to those.

Inpa software

INPA Cable software

Should you get ANY errors or pop-ups during any phase of the installation, ignore them. INPA will still install.

Pre-Installation
1.Download all required files and programs,as listed below. Also you should have the K+DCAN cable in your possession(link provided below).
2.Extract the INPA.rar to your desktop. You will be left with INPA folder.
3.Extract INPAcable.rar to your desktop. You will be left with INPA cable folder.

Installation

Phase 1
1.Open INPA cable folder and move the top four folders (step1, step2, step3 and driver) to Windows(C folder of your PC.
2.Whilst in Windows(C, open 01_Step1 folder and copy EC-APPS over to your Windows(C drive.
3.Go back to 01_Step1 folder and open the NFS folder. Open Entpackt folder. Open disk 1, find SETUP.exe and right-click it. Goto Properties/Compatibility and set it to run in compatibilty mode for Windows XP (Service Pack 3). Also, check the box for Run as Administrator. Hit Apply then Ok.
4.Double-click SETUP.exe to launch.
5. Once window pops up, select Windows XP. Click Weiter (it means Next).
6.Click Weiter 3 more times. Make sure User Mode is selected. Click weiter.
7.Make sure top choice is selected (1 Parametri……). Click Weiter.
8.Ensure OBD is selected. Press weiter. Ensure Kein API-TRACE. Click weiter. Ensure Kein IFH-TRACE is selected. Click weiter.Ensure Komfort(.IPO) is selected. Press weiter.
9.Press OK. Let install. Press ok, and again. Press any key to continue.
10.Select Ja,Computer jetzt neu starten. Click Breeden. This will restart your PC as needed.

Phase 2
1.Goto Windows(C/02_Step_2/INSTALL and right click on Instprog. Set it up to run in compatibility mode as mentioned in Phase1, step 3. Then double-click to launch.
2.Press OK if prompted. Select Enlgish then press weiter.
3.Press continue and continue again. Ensure destination is under C:
4. Press continue. Select BMW Group Rectification programs UK. (NOT USA) Press continue.
5.Check off all white boxs. There will be 2 update and 1 complete that needs to be checked. Press continue, and again. You may get error. ignore it. Otherwise, press End.
6.Restart your PC once more manually.

Phase 3
1.Goto Windows(C/03_Step_3/INSTALL and right click on Instprog. Set it up to run in compatibility mode as mentioned in Phase1, step 3. Then double-click to launch.
2.Press OK if prompted. Select English then press weiter.
3.Press continue and continue again. Ensure destination is under C:
4. Press continue. Select BMW Group Rectification programs UK. (NOT USA) Press continue.
5.Under INPA 5.0.1, check off Update. Under NCS Expert 3.0.8, check off Complete. Press continue.
6.Click on Rename. In the box, type the number 1 and press continue, and again. You might gett error. Ignore it. IF prompted, press End.

Phase 4
1.Plug in your INPA K+DCAN cable. You will from now on use ONLY that port.
**Windows 10 will automatically update the driver IF needed. Windows 10 also already has a serial function. This is all we need to modify.**
2.In your search box (lower left of screen next to Windows button), type “Device Manager”. Click on the top option.
3.Once in Device Manager, locate Ports(COM & LPT) and click on the little plus sign next to it. It should now show USB Serial Port (COMx) under Ports(COM & LPT). **The little ‘x’ is in place of whatever number you have the cable plugged into).
4.Right-click on USB Serial Port (COMx) and click Properties.
5.Goto Port Settings tab. Click Advanced. Change the COM Port Number to COM1.
6.Change Latency Timer from 16 to 1. Press ok. Press ok again. Close Device Manager.
7.Goto Windows(C/Driver_D_CAN_USB and double-click OBDSetup.exe. Press Enter.

Phase 5
1.Go into Control Panel/System/Advanced System Settings/Environment Variables.
2.Ensure that System Variables TMP and TEMP both contain the path C:EDIABASBin.
3.If not, manually add it in. Example: C:WindowsTemp;C:EDIABASBin
4.the ‘;’ is important to seperate paths. Please ensure you put that in there then add in the rest.

Dropbox Free Version Windows 10

Phase 6
1.From Desktop, open INPA folder then open the second INPA folder. Right click on Step_1_Install_BMW_Tools and click Poperties. Goto Compatibilty and run the program in compatibility mode for Windows 7. Also, run as administrator. Click Apply then ok. Doulbe-click to launch.
2.Enusre destination path is C:BMW Tools , if it is not change it to that.
3.Press Install. You will get an error. Press ok.
4.Goto Windows(C/BMW Tools/Programminstallation and right-click on setup.exe. Set it up for compatibility mode as stated in Phase 1, step 3.
5.double-click to launch. Select English, press ok. Press Next. Accept and press next. Press next again and again.Ensure the installation destination is C:EDIABAS, click next.Ensure installation destination is C:EC-APPSNFS,click next.Ensure installation destination is C:EC-APPSINPA, click next.Ensure installation destination is C:NCSEXPER, click next.Ensure start menu folder is BMW Standard Tools. click next.
6.You do NOT have to perform the data backup if not desired. I didn’t. Uncheck box if not wanting data backup and click next.Ensure hardware-interface setting is STD:OBD and click next.Ensure COM port for serial OBD is Com1. Check the box for USB to serial adapter. click next. Click Install. If any errors, ignore them.

Phase 7
1.Goto Desktop/INPA/INPA and right-click the file ‘Step 2_ Install INPA.exe‘.Set up for compatibility as mentioned in Phase 6,step 1.
2.The Destination Path should be ‘C:temp’, leave as it is and click ‘Next’.
3.Choose ‘English’ and select ‘Continue’ and ‘Continue’.
4.Select ‘C:’ and then ‘Continue’.
5.Select ‘BMW Group Rectification Programs UK’ and click ‘Continue’.
6.Tick ‘Update’ for all options where not grayed out, then ‘Continue’.
7.Select ‘OBD’, then ‘Continue’ and ‘Continue’.
8.The installation will begin and complete.

Phase 8
1.Goto Desktop/INPA/INPA and right-click the file ‘Step 3_ Final Update.exe‘.Set up for compatibility as mentioned in Phase 6,step 1.
2.The Destination Path should be left as it is, then select ‘Install’.
3.Select ‘Yes to all’.
4.Once completed, the window will close itself.

Phase 9
1.Goto Desktop/INPA/INPA and double-click the file ‘serial port.reg‘.
2.When prompted, select ‘Yes’ and ‘Yes’. You will receive confirmation that your registry has been updated.
3.Locate the file ‘C:EDIABASBinobd.ini’ and copy this file into your Windows folder.
4.Edit the file ‘C:EC-APPSINPACFGDATINPA.INI’ in Notepad, locate the section that starts with ‘//F3’, remove the slashes at the beginning of the three lines of text, and amend any instance of ‘F10’ to ‘E46’.
**Step 4 is only needed if you are working on an E46. Otherwise, ignore this step!

In theory, you will not have INPA diagostic software on your desktop. Right-click it and set up compatibility mode as mentioned in Phase 1, step 3. Double click to launch.