Asus Motherboard Cpu Temperature Monitor

Posted onby admin
  1. Asus Motherboard Cpu Temperature Monitor Driver

(*This post may contain affiliate links, which means I may receive a small commission if you choose to purchase through links I provide (at no extra cost to you). Thank you for supporting the work I put into this site!)

If your motherboard chipset and VRM gets very hot, then they can lead to instability and other issues with your PC. VRM or Voltage Regulator Module is responsible for providing power to your processor or CPU and RAM. It converts higher 12V or 5V voltages from the PSU to a much lower voltage (1.2V or so) that is required by the CPU or processor. VRM mainly consists of MOSFETs, Inductors or Chokes, Capacitors, and a Logic Unit which is an Integrated Circuit (IC) and is called the PWM controller. MOSFETs are the main element of a VRM, and they can get very hot during high CPU usage, and especially during overclocking. Almost all of the mid-range and high-end motherboards come with heatsinks over VRMs for overclocking, so as to prevent them from overheating and thus avoiding any kind of system instability and unexpected shutdown.

The temperature sensor for the CPU is normally on the CPU. So if it failed there I would think you would be having more problems than this! You could try a CPU reset. Turn off the PC, switch off the power supply (or unplug the cord), Remove the 3v battery on the board, press the power button for a few seconds, put everything back and power on. ASUS AI Cooling function will automatically manage and control motherboard-connected fans to ensure optimal settings based on current system load and temperature. Asus were the first ones to implement many temperature settings and fan control features so you shoudl be fine even if you dont set a manual curve. The NZXT CAM is actually fine. The CPU increases its speed depending what it needs. This means more voltage is being sent. Speed Fan offers convenient CPU temperature monitoring and several other useful features. Besides the CPU temperature, the program also displays the temperature of the system, graphics card, and individual cores in a multi-core processor. It works on all versions of Windows from Windows 95 to Windows 10.

Modern-day motherboard chipsets consist of I/O channels and Interfaces that include SATA ports, USB ports, RAID support, some PCI-E lanes and maybe some other things depending on the chipset. Basically, a motherboard chipset allows I/O devices and components to communicate with the CPU. Intel calls their motherboard chipset as PCH (Platform Hub Controller), whereas AMD calls it FCH (Fusion Controller Hub) or just motherboard chipset only.

A low-end motherboard chipset may not get that hot, but a mid-range and high-end motherboard chipset can get very hot and they are generally equipped with bigger heatsinks. Motherboard chipsets generally remain within the safe temperature range, but if they cross the threshold temperature then you can face various issues regarding stability.

Monitoring and knowing about your VRM and Motherboard temperature is very important, when you are facing any kind of instability issues with your system because these components often get ignored most of the time. So, here I am going to list down various methods to find out your motherboard chipset and VRM temperature, so that can you can take appropriate measures to cool them down.

How to Check VRM & Chipset Temperature

Here are the various methods and techniques by which you can monitor your motherboard’s chipset and VRM temperature. Most of these methods can also be used to measure graphics card VRM temperature, and the temperature of its, GPU & VRAM.


The easiest way to find out VRM and chipset temperature is by using HWiNFO, which is a very good hardware information and monitoring tool or utility. It should be noted that this method only works if your motherboard has built-in sensors for VRM and Chipset temperature monitoring. To know about the temperature of your motherboard chipset and VRM, launch the HWiNFO program, and from Menu bar, go to Monitoring->Sensor status. A window will open, and here scroll down to your motherboard section. For example, the motherboard listed here is Gigabyte B250-D2V-CF. Below that, you will find temperature readings for System, PCH, CPU and VRM MOS. PCH is your motherboard chipset and VRM MOS is the temperature of the MOSFETs of VRM, which are the main components of VRM. You can download the HWiNFO for free from the link given below.

Related:Best Free Hardware Monitoring & Information Utilities

Infrared Thermometer

The second easiest way to find out the VRM and Chipset temperature is by using an Infrared Thermometer or Infrared Temperature Gun. It is a small device that lets you find the temperature of any object without touching. Just hold it in your hand and direct it towards the object of which you want to find out the temperature, and then within a fraction of second, the temperature reading gets displayed on the LCD screen of the device. The device also comes with a built-in laser at its front end that lets you target and focus on smaller objects or at a particular point for better accuracy. So, if you want to find out about the temperature of your VRM or chipset, then open your computer case and point the laser of the temperature gun over the MOSFET / Chipset, or its heatsink to find out its temperature.

It must be noted that this device gives only the surface temperature of the object, so if your VRM or Chipset has heatsink over it then it will give you the temperature of the heatsink, which will be few degrees lower than the actual temperature of the component. An infrared thermometer is also very helpful to crosscheck the temperatures of the VRM and Chipset, even when the motherboard has sensors for them. This is because sometimes a bad sensor can report much lower or higher temperatures. So, it is a good practice to verify the temperatures with an infrared thermometer, even when everything is alright or when you have some doubts regarding their temperature. You can also find out your CPU heatsink temperature, graphics card VRM temperature, RAM temperature or temperature of other things using the infrared thermometer. These Infrared Thermometers can be found pretty cheap, and here are some affordable Infrared Thermometers that you can use for finding the temperature of any object including electronic components:

Etekcity Lasergrip 774 Infrared Thermometer

A cheap infrared thermometer that can be used to measure the temperature of any object including electronics and internal components of your computer. It can measure temperature in range of -58°F to 716°F / -50°C to +380°C with ±2% or 2°C. However, it has got fixed emissivity (0.95), which means you will have a hard time getting an accurate temperature reading from shiny surfaces or shiny metals that are bad at emitting their own infrared radiation, as they mostly emit ambient infrared radiation. But for the electronics, it will serve your purpose pretty good and can provide results with acceptable accuracy.

This IR Thermometer has 12:1 distance spot ratio and can measure the temperature of distant objects at pretty good accuracy. It comes with an LCD screen that is backlit, and for power, it requires a 9 Volt battery. The temperature response time is under 500ms, which is quite fast, and it can operate in the temperature range from 0°C to 50°C. The construction quality of the thermometer is good and it has got UV paint coating to resist scratches and wear. There is another model available Etekcity Lasergrip 1080 at a couple of dollars more that has higher temperature recording range of -58°F to 1022°F / -50°C to +550°C, while other features remain the same. You can check it out too from the links given below.

Note: To get the best accuracy, the distance between the thermometer and object of measurement should be around 14.17 inches (36cm).

Etekcity Lasergrip 774 Infrared Thermometer Specifications
Temperature Range-58°F to 716°F / -50°C to +380°C
Accuracy±2% or 2°C
Laser GuidanceSingle Laser
Battery9 Volt
Distance Spot Ratio12:1
FeaturesBacklit LCD Screen, Auto-Off function, Low battery indicator, <500ms Response time

Etekcity Lasergrip 1022 Infrared Thermometer

[Adjustable Emissivity, More Accurate]

This Infrared Thermometer comes with adjustable emissivity (0.1 – 1.0 Adjustable) to provide you better accuracy in measuring temperatures of shiny metals and other objects. It can measure temperature in the range of -58°F to 1022°F / -50°C to +550°C with an accuracy of ±2% or 2°F/2°C. For guidance and targeting, it comes with a single laser, and for display, it has got an LCD screen that is backlit. The distance spot ratio for this Infrared temperature gun is 12: 1 for measuring the temperature of far off objects with pretty good accuracy. The response time is under 500ms for super-fast measurement. It is solidly built has got UV coating over it for protection. A dual laser variant of this model is also available as Etekcity Lasergrip 1022D for better aiming, and you can check it out too from the links given below.

Note: For best accuracy, the distance between the thermometer and object of measurement should be kept at approximately 14.17 inches (36cm). I personally use Fluke IR Thermometer because it is a well-reputed brand and offers great quality and performance, but on the flip side, it costs a little extra.

Etekcity Lasergrip 1022 Infrared Thermometer Specifications
Temperature Range-58°F to 1022°F / -50°C to +550°C
Accuracy±2% or 2°F/2°C
Emissivity0.1 – 1.0 Adjustable
Laser GuidanceSingle Laser
Battery9 Volt
Distance Spot Ratio12:1
FeaturesBacklit LCD Screen, Auto-Off function, Low battery indicator, <500ms Response time

Thermal Probe / Temperature Sensor

Another great way to find out about your VRM and Chipset temperature is by using a Thermal Probe or Temperature sensor. These thermal sensors are based on the thermistor and come with a 2-pin connector that can be connected to the motherboard temperature sensor header (if you have any), supported aftermarket fan controller or standalone digital temperature displays that you can easily find in the market or online.

You can attach the thermal probe to the VRM, Chipset or any other component using thermal tape and then monitor the temperature using the temperature monitoring software such as HWiNFO or on the display of your fan controller or other digital temperature monitoring device with LCD display. These thermal probes can monitor the temperature to up to 125°C, which I think is sufficient enough. Below are some good thermal probes or temperature sensors that you can get for temperature monitoring of your internal PC components.

XSPC Wire Sensor 10K

[50cm Sleeved cable, 2-pin]

Phobya 10K Temperature Sensor

[80cm Sleeved cable, 2-pin]


You can also use a multimeter with temperature detection capability to measure the temperature of various objects including VRM and Chipset. This kind of multimeter comes with a thermal probe that you attach to the surface of the component using thermal tape and monitor its temperature. Besides measuring temperature, a multimeter is a very useful device that is used to measure voltage, resistance, current, frequency, continuity and for checking electronic components like a transistor, diode, capacitors, etc. It is also the best device for troubleshooting electronic and electrical components or devices. I personally think it is a must-have device if you are an enthusiast or work with computers and electronics. Here are some good multimeters that you can get for your troubleshooting needs.

AstroAI Digital Multimeter, TRMS 6000 Counts Multimeter

An Affordable Digital Multimeter that measures Voltage, Current, Resistance, Continuity, Capacitance, Frequency; Tests Diodes, Transistors, Temperature and more. It comes with a large LCD that is backlit and uses one 9V battery. Ideal for both household and commercial use.

Tacklife DM01M Advanced Digital Multimeter TRMS 6000 Counts

Another good budget digital multimeter that can measure temperature, and is great for both household and commercial applications. This multimeter uses four AA batteries for its working.

Infrared Thermal Camera

A thermal camera not only measures temperature, but it can show all the heat zones of the object and its surroundings so that you can get a complete picture of what is going on. Just like Infrared Thermometer, a Thermal camera also uses infrared radiation to know about the temperature of the objects. However, it is a more complex and advanced device compared IR thermometer, and also way expensive than an IR thermometer. The main advantage of a thermal camera is that it paints a clear picture of the heating object and its surroundings, which allows you to make better and informed decisions to solve the ongoing issue. It has various other applications too e.g. to detect gaps, leaks in buildings or houses or HVAC checks. It is also known as a thermal imager, an infrared camera or thermal imaging camera. Here is a good thermal camera at a reasonable price that you can get for various tasks.

HTI HT-18 Infrared Thermal Camera

A basic handheld infrared thermal camera with a 3.2” display, having a resolution of 220 x 160 pixels. It can detect the temperature in the range of -20°C to 300°C (-4°F to 572°F) with an accuracy of ±2.5°C or ±2.5%. The camera comes with adjustable emissivity (0.1 to 1.0) and has a fixed focus mode. It uses 3.7V Built-in Rechargeable Battery and a USB interface for connectivity. Also, a 3GB SD card comes included with the camera itself. It is pretty lightweight and is one of the most affordable thermal cameras around that also delivers good performance.

How much VRM & Chipset Temperature is Safe?

This is a question that has been asked many times by users, and I think there is no specific answer to it as every motherboard chipset and VRM has its own threshold temperature limit. However, in general practice, it is better to keep VRM below 100°C and motherboard chipset or PCH under 70°C to be on the safer side because above these temperatures they lose out on performance and efficiency.

VRM should be under 100°C

Chipset should be under 70°C to 75°C

*Above 100°C, efficiency and performance of components decrease drastically.

How to Reduce VRM & Motherboard Chipset Temperature

Asus system temperature monitor

There are a couple of ways to reduce your motherboard VRM and chipset temperature. If your motherboard VRM / Chipset has heatsink installed over it then it might be possible that the contact between the heatsink and the VRM MOSFET / Chipset is weak, which is causing high temperature. So, to solve this issue you have to install better thermal pads with adequate thickness for proper contact and heat transfer. To maximize cooling, you can also install a small 40mm or 60mm on the heatsink of the chipset, and around the VRM for actively cooling them, and thus reducing temperatures to greater levels.

In cases, where your motherboard VRM chipset & VRM does not come with heatsink installed, then the best way to cool them is by installing an additional small case fan (40mm or 60mm) in your case that blows air over them.

Final Words

Well, I think I have summed up pretty well on how you can check and monitor your motherboard’s Chipset and VRM temperature. It is always better to know about the temperatures of the internal components of your PC so that you can take appropriate actions in time before any mishap happens. I strongly suggest you regularly monitor the temperature of your components once in a month or so at moderate to full load, as to make sure that everything is working fine or not. If you have any questions or doubts regarding this topic then you can ask your queries by leaving a comment below.

AsusTempster is a CPU temperature monitoring and guarding software for Asus mainboards

Asus Tempster is a practical tool that intends to provide you with temperature information about your CPU. Whether you want to keep an eye on the temperature of your processor or you need to compare the values under certain circumstances, this tool can be of help.

As the name clearly states, the program is designed to work on the computers that have an ASUS motherboard. It connects to the temperature sensors from the motherboard in order to display the information on your desktop.

The main window of the program displays a thermometer for the CPU temperature that is expressed both in Fahrenheit and in Celsius degrees. For precision purposes the values are also displayed in a digital counter. A warning message indicates when the temperature is above the threshold specified in the Settings window.

The application includes multiple features that can help you react when the processor’s temperature is too high. You can set the program to alert you by playing a sound when the temperature exceeds a certain limit. An automatic shutdown option is also included in case your computer is overheated and you are not around to take action.

An interesting and potentially convenient feature is the Window Marker. It enables the application to add the temperature information in the title bar of all the maximized windows so you can view the temperature while performing other tasks.

The log feature allows you to record and to view the temperature information for longer period of time. Thus, you can create a statistic with the heat generated by the processor in a certain time interval or while using a CPU intensive application.

Overall, Asus Tempster provides all the basic features required to monitor the temperature of the CPU in real-time. It is simple and efficient solution for monitoring any processor from an ASUS motherboard.

Filed under

Asus Tempster was reviewed by Sorin Cirneala
This enables Disqus, Inc. to process some of your data. Disqus privacy policy

Asus Tempster 2.03 Update

add to watchlistsend us an update
runs on:
Windows All
file size:
122 KB
main category:
visit homepage

top alternatives FREE

Asus Motherboard Cpu Temperature Monitor Driver

top alternatives PAID